|
Feature
|
Advantages
|
| 19"
4U rack-mount chassis meets EIA RS-310C standard
|
Easy
to fit in a 19" cabinet from different venders
|
| A
lockable front door with acrylic windows
Power
On/Off switch with LED indicator, reset and K/B
lock switches inside the lockable door |
Good
for dust-proof
Avoid
accidental reset for better running security
Running
status visible |
| Modularized
function panel for one or dual systems
Reserve
LED holes for redundant PSU |
Easy
for installing dual systems and redundant PSU
Easy
to keep stock and OEM project |
| Replaceable
air filter |
Good
for easy cleaning |
| Two
K/B DIN connectors on both front and rear panels
|
Convenient
to connect to the keyboard |
| New
K/B connector cap |
Good
for dust-proof at the front K/B connector
|
| Dual
ball-bearing cooling fans |
Better
ventilation to provide the system with higher reliability
|
| Enhanced
drive bracket to hold 3x5.25"+1x3.5" (external)
and 1x3.5" drives (internal) |
More
flexibility to integrate varied systems
Suitable
for installing RAID and CD-ROM drive |
| Shock-mount
cushion for the drive bracket |
Suitable
for harsh industrial environment |
| Two
adjustable positions for hold-down card retainers
|
More
flexibility to tightly fix all the cards
|
| Changeable
modularized back panel for 14-slot ISA/PICMG BP
or ATX M/B |
Only
one minute needed to change the back panel
Easy
to change to different backplanes and keep stock |
| Field
replaceable power supply bracket for both normal
PS/2 PSU and PS/2 type redundant PSU |
Only
3 minutes to change the defective PSU
Only
30 seconds to change the defective PSU module |
 |
| |
|
Redundant
power supply
Our
new PSU bracket can install either PS/2 type PSU
or PS/2 redundant PSU to enhance its security
for high-end systems.
|
|
3x5.25"+2x3.5"
drive space
RPC-500N
enhances the drive bracket to hold up to 3x5.25"+2x3.5"
disk drives for floppy, hard disk and CD-ROM.
|
|
ATX
motherboard
ATX
mother board can be installed inside RPC-500N
just by changing the modularized back panel.
|
|
Replaceable
function panel
Two
modular designed function panels are available
for single or dual system display panels. Any
OEM project is welcome. |
|
Replaceable
panel for PSU modules
RPC-500N
is designed to install different power supply
panels for PS/2 or redundant PS/2 type PSU.
|
|
Dual
fans for better ventilation
RPC-500N
is equipped with two ball bearing fans to have
better ventilation and a replaceable filter to
exclude dust. |
|
Dual
card retainers position
Two
positions for card clamps to hold both PCI and
ISA cards tightly. |
|
New
rack-mount handle
The
new handles are designed to hold the system tightly
and distinguish from others. |
|
K/B
connector cap
RPC-500N
includes a keyboard connector cap to prevent dust.
|
|
|
