NC-6060
Best Cost/Performance All-in-One PICMG SBC with VGA/LAN, Based on the Intel® Pentium® III Processors

 

General Description

NC-6060 is built with VIA PLE133 high performance graphic integrated chipset and cost effective Realtek fast Ethernet controller that support Intel high performance processor, Intel Socket 370 type Pentium® III processor. Based on Intel® Celeron® or Pentium® III processor and supporting DIMM up to 1GB SDRAM, NC-6060 is the best solution for computer telephony and telecommunication application.

Specification

CPU

  • Intel® Celeron® or Pentium® III processors With PSB 66/100/133 MHz

Chipset

  • VIA PLE133 Chipset

Main Memory

  • Three 168-pin DIMM sockets support PC/VCM 133/100 SDRAM up to 1GB

L2 Cache Memory

  • 128KB L2 Cache built in Celeron® and 256KB in Pentium® III processor

BIOS

  • AMI system BIOS with 256KB Flash ROM

Bus Interface

  • Follow PICMG 1.0 Revision 2.0 standard (32-bit PCI and 16-bit ISA)

On-board VGA

  • VIA 2D/3D AGP VGA; 1280x1024, 256 colors at refresh rates 60Hz

  • Display cache with shared memory up 8MB

On-board Ethernet LAN

  • RealTek 8139C PCI Fast Ethernet Controller integrated LAN controller to support RJ-45 connector

PCI IDE Interface

  • Support two enhanced IDE ports up to four HDD and Ultra DMA/33/66/100

Floppy Drive Interface

  • Support one FDD port up to two floppy drives

Serial Ports

  • Support two high-speed 16C550 compatible

UARTs IR Interface

  • Support one 6-pin header for serial standard Infrared wireless communication

Parallel Port

  • Support one parallel port with SPP, EPP and ECP Modes

USB Interface

  • Support two USB (Universal Serial Bus) ports for high-speed I/O peripheral devices

Note: For a standalone application, both USB ports may be available. When installing NC-6060 in a standard Chassis, physical limitation allows only one USB port available.

PS/2 Mouse and Keyboard Interface

  • Support one 6-pin Mini-DIN connector and one 5-pin shrouded connector for PS/2 use/keyboard connection

ATX Power Control Interface

  • One 4-pin header to support ATX power control with Modem Ring-On and Wake-On-LAN function
 

Auxiliary I/O Interfaces

  • System reset switch, external speaker and HDD active LED

Watchdog Timer

  • Support 8 intervals from 0.5 sec./min. to 64 sec./max. by hardware jumper setting

Real Time Clock/Calendar (RTC)

  • Support Y2K real time clock/calendar with battery backup

Disk-On-Chip (DOC) Feature

  • Reserved one 32-pin socket for M-systems Flash Disk up to 288MB

  • DOS, Windows, Win95, NT (bootable) drivers and Utility supported

On-board 68-pin PCI Device Connector

  • Support one additional PCI device daughter board

High Driving Capability

  • Support 64mA high driving capability for multi-slots ISA-bus

External Power Connector

  • Support one standard 5.25" disk drive power connectors to enhance power driving

CPU Cooling Fan

  • Support two 3-pin headers with wafer

System Monitoring Feature connector

  • Monitor CPU and system temperature

Bracket

  • Support one Mini-DIN, two-port USB, one Ethernet port and one CRT port

Power Requirement

  • +5V@8A, +12V@150mA,
    -12V @20mA

Board Dimension

  • 338.5(L) x 122(W) mm

  • 13.3"(L) x 4.8"(W)

  • 6-layer PCB

Operating Temperature

  • 0 to 55ºC, 32 to 131ºF

Storage Temperature

  • -20 to 75ºC, -4 to 167ºF

Relative Humidity

  • 5% to 95%, non-condensing

Ordering Guide

NC-6060

  • High-integrated SBC with VGA /LAN, based on the Socket 370 Pentium® III or Celeron® processors
* Specifications are subject to change without notice.

* Pentium III is a registered trademark of Intel Corporation.
* Celeron® is a trademark of Intel Corporation.
* Other trademarks, logos, brand names and company names are the property of their respective owners.

The Company Corporate News Event News Product News Products Service & Support Career Quote & Request Worldwide Distributors Site Map Home
Copyright © Portwell, Inc.    All rights reserved.    Last updated: March 20, 2002